Sansin Purity Glacier - Transparent Protection for interior wood

• Wooden cabinets.
• Shelves.
• Doors.
• Windows.
• Ceilings.

• Walls.
• Wood logs and interior wood structures.
• Furniture and other wooden surfaces.

For added UV protection or to achieve a special colour, opt for a pigmented version of Purity Interior Stain for the first coat.

1. What is Sansin Purity Glacier and what is it used for?

Sansin Purity Glacier is a clear coating designed to protect interior wood surfaces, such as cabinets, shelves, doors, furniture and floors, from wear and tear.

2. Can Purity Glacier coating really prevent wood from yellowing over time?

Yes, Purity Glacier is formulated to be non-yellowing, preserving the natural beauty of the wood while providing long-lasting protection.

3. What interior surfaces can I use Purity Glacier on?

You can use Purity Glacier on a variety of wood surfaces such as cabinets, shelves, doors, windows, ceilings, walls, logs, interior wood structures and furniture.

4. Is the Purity Glacier resistant to scratches and daily wear and tear?

Yes, it provides a tough film that protects against daily wear and tear and meets KCMA criteria for durability of surface finishes.

5. How does Purity Glacier protect against UV rays?

Purity Glacier contains components that filter UV rays, which helps protect wood from sun damage.

6. Is this product easy to clean? What cleaning method do you recommend?

Yes, it is easy to clean with soap and water, making maintenance simple and environmentally friendly.

7. Can I apply Purity Glacier to furniture or cabinets that have already been varnished or painted?

Surface must be dry and free of contaminants. It is recommended to test the product on a small area to ensure good adhesion and color match.

8. What are the steps to follow to prepare the surface before applying Purity Glacier?

Remove hardware, ensure surface is clean and dry, repair defects, sand with 120-150 grit sandpaper, remove dust and test product on a small area.

9. How should I apply Purity Glacier to get the best results?

Add up to 5% water if using a brush, but do not dilute for spray application. Apply evenly without overworking the product and allow to dry.

10. How many coats of Purity Glacier should I apply and how long should I wait between coats?

Apply a first coat and let dry for 1 hour. If necessary, sand lightly and apply a second coat. For more protection or a glossier finish, a third coat can be added after 24 hours.

SURFACE PREPARATION:

Preparation is crucial to the success of your project. To apply to new wood:

1. Remove all hardware or cover any hardware that cannot be removed.

2. The surface must be dry and free of contaminants such as waxes, silicones, adhesives and dirt.

3. Avoid using steel wool which could leave iron particles on the wood surface.

4. Repair surface defects such as holes and cracks using a quality acrylic-based filler tinted to match the project color. The filler must be completely dry before sanding.

5. Extra effort in sanding will improve the aesthetics of your project. Use 120-150 grit sandpaper, sanding in the direction of the grain for best results.

6. Remove all dust particles using a vacuum cleaner and a damp cloth.

7. Test product on a small area to ensure proper penetration and color match.

DIRECTIONS FOR USE

To apply by brush, add up to 5% water to Glacier product. Do not add water if applying by spray.

• To apply by spray, use a conventional air-assisted or airless sprayer, avoiding pumps that create hollows in the wood or other surface problems. All equipment should be qualified for the application of this product.

•DO NOT SHAKE. Mix well before and during application.

• Apply a first coat of Purity Interior Glacier by spraying or using a nylon-polyester brush or applicator pad. Spread the top coat evenly. Purity Glacier has very good leveling power; be careful not to overwork the product.

Directions:

• Test the product on a small area to ensure adequate penetration and color.

•Leave to dry for 1 hourunder ideal temperature and humidity conditions: between 15-20°C (60-70°F) and less than 70% relative humidity.

• If necessary, once the surface is completely dry, lightly sand using 220-320 grit sandpaper or a fine synthetic sanding block. Always sand in the direction of the grain.

• Remove any dust particles using a vacuum cleaner or damp cloth.

• Apply a second coat of Sansin Purity Interior Glacier.

• For additional protection or a glossier finish, apply a third coat after 24 hours.

DRYING

Allow to dry for 1 hour in ideal temperature and humidity conditions, which are between 15 and 20°C (60-70°F) and a relative humidity of less than 70%.

Technical Sheet

Safety data sheet